Monday, November 02, 2009

Well, crap. Dead bearing on the lathe.

It's actually a bushing, but in any case it's shot. Yes, there's a place that has parts for a Sears 109 lathe. And they cost forty dollars.

Dammit.

6 comments:

Anonymous said...

if you have decent measurements, you should be able to beat that price at ant bearing outlet.

Dennis the librarian shusher

DaveH said...

South Bend used to make a lot of the Lathes that Sears sold. Grizzly Tools just bought out the rights and patterns for SB and is selling parts here:

http://southbendlathe.com/

If you can get a decent measurement (as Dennis suggested), check out if there is an Applied store near you:

http://www.applied.com/

Keith said...

I'm assuming that it is a plain / babbit bearing?

if it is roller, they should be widely available

Firehand said...

It's a brass collet-type bearing, threaded at the back for a nut.

From what I can find, these were made by AA, so South Bend won't have it.

Sendarius said...

Do you have a tip jar?

I figure that I have received more than $40 in value while lurking here, and would be happy to foot the bill for you.

Firehand said...

No, never set one up. I do appreciate the compliment and the offer, though.

When I can, now that it's back up, I'm going to take Og's suggestion: get a suitable piece of Oilite and make a spare.